Drum Cleaning
Printed images may be light or distorted when the machine is used immediately after installation or after a long period time of
not using the machine. If printed images are light or distorted, clean the drum inside the machine as necessary.
•
It takes approximately 35 seconds to clean the drum.
•
Drum cleaning cannot be performed drum printing.
1
Press
(Settings/Registration) → [Adjustment/Maintenance] → [Maintenance] → [Clean Drum] .
2
Press [Start] .
When cleaning is complete, try printing again.
Cleaning the Touch Panel Display
Follow the procedure below to clean the touch panel display.
1
Clean the touch panel display with a cloth dampened with water, and then wipe it clean with a soft,
dry cloth .
Since the touch panel display becomes dirty as you use it, it is recommended that you clean it once every week or 10 days .
1
1-73
Routine Cleaning