Staple Finisher-B1/Booklet Finisher-B1/External 2/3 Hole Puncher-A1 (Optional); Replacing The Staple Cartridge In The Stapler Unit - Canon C9075 PRO Operating Manual

Staple Finisher-B1/Booklet Finisher-B1/External 2/3 Hole
Puncher-A1 (Optional)
This section describes the procedure for replacing the staple cartridge in the Staple Finisher-B1/Booklet Finisher-B1, and how to
remove the punch waste from the External 2/3 Hole Puncher-A1.

Replacing the Staple Cartridge in the Stapler Unit

1
When the Staple Finisher-B1/Booklet Finisher-B1 is almost out of staples and the staple cartridge in the stapler unit must be
replaced, a screen prompting you to replace the staple cartridge appears on the touch panel display. Follow the procedure
described below to replace the staple cartridge.
Use only staple cartridges intended for use with this machine. See e-Manual > Optional Products (imageRUNNER ADVANCE
C7065/C7055).
•
We recommend that you order staple cartridges from your local authorized Canon dealer before your stock runs out.
•
Remove the orange seal that holds the staples together after you place the staple cartridge into the staple case.
1
Open the front cover of the finisher .
1-54

Staple Finisher-B1/Booklet Finisher-B1/External 2/3 Hole Puncher-A1 (Optional)

Staple Finisher-B1 Booklet Finisher-B1