List Of Error Codes Without Messages - Canon C9075 PRO Operating Manual

List of Error Codes without Messages

If a job or operation does not complete successfully, check the error code, and perform the necessary operations according to
the error code displayed. You can check the error code on the Details screen when you press [Log] on the Status Monitor/Cancel
screen. (See e-Manual > Status Monitor/Cancel.)
If a send, receive, or fax job does not complete successfully, the error code is printed in the Results column on the Activity Report
and Send Report. However, if a send job is canceled, "STOP" is printed in the Results column on the Send report. (See e-Manual >
Settings/Registration.)
Perform the necessary procedures according to the error code.
# 001
Cause 1 Different sized originals were scanned without setting the Different Size Originals mode.
Remedy Set the Different Size Originals mode, and then try scanning again.
Cause 2 Different sized originals were scanned in the 2-Sided Original without setting the Different Size Originals mode.
Remedy Set the Different Size Originals mode, and then try scanning again.
# 009
Cause 1 There is no paper.
Remedy Load paper. (See "Paper Drawers, " on p. 1-2.)
Cause 2 The paper drawer is not inserted correctly into the machine.
Remedy Insert the paper drawer properly. (See "Paper Drawers, " on p. 1-2.)
# 099
Cause1 Copying/printing was interrupted.
Remedy Try copying/printing again.
Cause2 An error occurred because the main power switch was turned OFF while a job was being processed.
Remedy Check to see if the main power switch is turned ON. Try processing the job again, if necessary. (See e-Manulal > Before You Start
Using This Machine.)
# 401
Cause When the data was being written to the medium, the machine detected that the memory was full.
Remedy Use the memory medium with sufficient free space.
# 403
Cause The job failed because the same file name existed. Generally, if the same file name exists, a file will be automatically renamed
by appending a number, which ranges from 1 to 999, to the end of its file name to avoid naming conflicts. However, this error
occurred because the file with the same number already added to its file name existed.
Remedy Rename the file, and then write the data again.
# 404
Cause The job failed because the write protect switch of the medium was turned ON.
Remedy Turn OFF the write protect switch of the medium.
2-113
List of Error Messages
2