Index - Canon C9075 PRO Operating Manual

that can be loaded.
•
Do not load the following types of paper into the Multi-drawer Paper Deck-A1. Doing so may cause a paper jam.
- Severely curled or wrinkled paper
- Envelopes
- Thin straw paper
- Heavy paper (more than 158 lb index (300 g/m
- Thin paper (less than 14 lb bond (52 g/m
- Paper which has been printed on using a thermal transfer printer (Do not print on the reverse side of this paper either.)
•
Fan the stack of paper well before loading it, and align the edges of the paper stack on a flat surface.
•
The Multi-drawer Paper Deck-A1 can only accommodate paper from 14 lb bond to 110 lb cover (52 to 300 g/m
•
If a message prompting you to load paper appears during printing, the remaining prints are automatically made after you load the correct
paper. If you select another paper source, the remaining prints are made after you press [OK].
•
To cancel printing, press [Cancel].
•
When changing the paper to load into the Multi-drawer Paper Deck-A1 from plain paper to coated paper, you may wait a moment because
temperature control of the warm air which fans a paper is required.
1
Press the button on the paper deck for which you want to load paper .
The inside lifter automatically descends to the paper loading position.
It may take some time for the paper deck to open, even if you press the open button.
2
Grip the handle, and pull out the paper deck until it stops .
2
))
2
))
2
) in weight.
Multi-drawer Paper Deck-A1 (Optional)
1
1-27