Paper Drawers; Loading Paper - Canon C9075 PRO Operating Manual

Hide thumbs Also See for C9075 PRO:
Table of Contents

Advertisement

Paper Drawers

This section describes how to load paper into the paper drawers.
The following paper sizes can be loaded into Paper Drawers
-
Paper Drawer left and right: LTR
1
-
Paper Drawer 3 and 4: 12" × 18", 11" × 17", LGL, LTR, LTRR, STMTR, EXEC and custom size (5 1/2" × 7 1/8" to 13" × 19 1/4" (139.7 mm × 182.0 mm
to 330.2 mm × 487.7 mm))
For more information on available paper stock that can be loaded into the paper drawers, see e-Manual > "Basic Operations."

Loading Paper

If the selected paper runs out, or the selected paper drawer runs out of paper during printing, a screen prompting you to load
paper appears on the touch panel display.
Follow the procedure below to load paper into the paper drawers.
When loading paper, take care not to cut your hands on the edges of the paper .
A screen prompting you to load paper also appears if the selected paper drawer is not fully inserted into the machine. Make sure that the paper
drawer is properly in place.
Do not load the following types of paper into the paper drawers. Doing so may cause a paper jam.
-
Severely curled or wrinkled paper
-
Envelopes
-
Thin straw paper
-
Heavy paper (more than 59 lb bond (221 g/m
-
Paper which has been printed on using a thermal transfer printer (Do not print on the reverse side of this paper either.)
Fan the stack of paper well before loading it, and align the edges of the paper stack on a flat surface.
Never place paper or any other items in the empty part of the drawer next to the paper stack. Doing so may cause paper jams.
Fan the stack of paper well before loading it. Paper such as thin paper, recycled paper, pre-punched paper, heavy paper, transparencies, and tab
papers should be fanned particularly well before loading it.
If a message prompting you to load paper appears during printing, the remaining prints are automatically made after you load the correct
paper. If you select another paper drawer, the remaining prints are made after you press [OK].
To cancel printing, press [Stop].
1-2

Paper Drawers

))
2

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents