Tripp Lite 0DT60001 Quick Start Manual

Tripp Lite 0DT60001 Quick Start Manual

Kvm extender usb

Advertisement

Quick Links

KVM Extender USB

Quick Start Guide

1111 W. 35th Street, Chicago, IL 60609 USA
www.tripplite.com/support
Copyright ©2012 Tripp Lite. All rights reserved.
ssasdfasdfasdf

Advertisement

Table of Contents
loading

Summary of Contents for Tripp Lite 0DT60001

  • Page 1: Quick Start Guide

    KVM Extender USB Quick Start Guide 1111 W. 35th Street, Chicago, IL 60609 USA www.tripplite.com/support Copyright ©2012 Tripp Lite. All rights reserved. ssasdfasdfasdf...
  • Page 2 KVM EXTENDER USB 1 . I nt r od u c t i on The KVM Extender USB system from Minicom is an advanced KVM extender that performs the following functions:  Extends KVM control over a computer up to a distance of 150m / 500ft ...
  • Page 3 QUICK START GUIDE (Optional) System cable Control box POWER SYSTEM CONTROL COMPUTER Power connector Local monitor Computer cable Figure 2 Transmitter back panel The figures below illustrate the Receiver unit. The Receiver can be up to 150m / 500ft away from the Transmitter. KVM EXTENDER USB MINICOM LOCAL...
  • Page 4: Connecting The Transmitter

    KVM EXTENDER USB 4 . P r e - i ns t a l l a t i on i n s t r uc t i o ns Place cables away from fluorescent lights, air conditioners, and machines that are likely to generate electrical noise.
  • Page 5: Connecting The System Cable

    QUICK START GUIDE 5.3 Connecting the System cable Connect the System cable CAT5/6/7 FTP cable to the System ports of the Transmitter and Receiver. 5.4 Connecting to the power supply The Transmitter receives its power from the connected computer and does not generally need an external power supply.
  • Page 6 KVM EXTENDER USB 7 . E x t e n de r + KV M sw i t c h s ys t e m w i t h o pt i o na l c om p ut e r a t Re c e i v e r p o s i t i on You can connect a KVM switch to the Receiver position.
  • Page 7: Keyboard Hotkeys

    QUICK START GUIDE Note! You can only gain control by pressing the Lock button if the Lock LED is currently not blinking. Re-pressing the Lock button at either position releases control and the Lock LEDs turn off. 8.1 Keyboard hotkeys To toggle between the Transmitter and the Receiver position, press: Caps Lock twice, release, then press C.
  • Page 8 KVM EXTENDER USB 1 0 . Te c hni c a l s p e c i f i c a t i o ns System cable CAT5/6/7 FTP 2x4x24 AWG Solid Wire cable Maximum distance 150m/500ft Mouse support USB mouse Operating systems All major operating systems Management...

Table of Contents