Table of Contents
Advertisement
7 . E x t e n de r + KV M sw i t c h s ys t e m w i t h o pt i o na l
c om p ut e r a t Re c e i v e r p o s i t i on
You can connect a KVM switch to the Receiver position. The Receiver position can
then either control the local computer or any computer connected to the KVM switch
at the Transmitter position computer.
Optional PC
Extended User
position
Figure 8 Extender + KVM switch with optional computer at Receiver position
The connections are the same as outlined above, with the addition of a KVM
switch connected to the Transmitter as follows:
Connect a VGA + USB cable to the Transmitter and the KVM switch. Connect
the HD15 connector to the Transmitter Computer port and connect the VGA
and USB connectors to the KVM switch Monitor and USB ports.
8 . O pe r a t i n g t he K V M E x t e n de r U S B s ys t e m
The system works on a first come first served basis – press the keyboard or move the
mouse at either the Transmitter (where relevant) or Receiver position to take control
of the Transmitter position computer.
Transmitter position: Press the Lock button to keep/gain control of the computer at
the Transmitter position. The Lock LED at the Transmitter position illuminates and
blinks at the Receiver position. The Control LED at the Transmitter position
illuminates.
Receiver position: Press the Lock button to keep control of the Transmitter computer
at the Receiver position. The Lock LED at the Receiver position illuminates and
blinks at the Transmitter position.
Press the Local button to gain control of the Receiver computer position. The Local
LED blinks.
KVM EXTENDER USB
CAT5 cable - 150m/500ft
Receiver
KVM Switch
I 0
1
2
Transmitter
Local User
position
5
1
1
1
1
1
1
1
3
4
5
6
7
8
9
0
1
2
3
4
5
6
Advertisement
Table of Contents
