Cable Your Router - NETGEAR Nighthawk R7000 User Manual

Cable Your Router

The following image shows how to cable your router:
Figure 4. Router cabling

To cable your router:
1. Unplug your modem's power, leaving the modem connected to the wall jack for your
Internet service.
If your modem has a battery backup, remove the battery.
2. Plug in and turn on your modem.
If your modem has a battery backup, replace the battery.
3. Connect your modem to the Internet port of your router with the yellow Ethernet cable that
came with your router.
4. Connect the power adapter to your router and plug the power adapter into an outlet.
5. Press the Power On/Off button on the rear panel of the router.
Nighthawk AC1900 Smart WiFi Router Model R7000
13