Setting Up the CodeMaster 100
Connecting Paddles or Multifunction Defib Electrodes
To connect the paddles/electrode adapter cable to the defibrillator, perform the
following steps:
1
2
3
To remove the paddles/electrode adapter cable, slide the paddle connector lock to
NOTE
the unlock position and pull the connector housing up and out.
Figure 2-2
Connecting External Paddles, Internal Paddles, or Multifunction Defib Electrodes
2-4
Slide the paddle connector lock on the paddles plug to the unlock position. To
do this, push the lock towards the top of the connector.
Insert the paddles/electrode adapter cable plug into the cable connector on the
defibrillator (Figure 2-2).
Slide the cable connector latch to the lock position, to secure the plug in place.
2-2