Automatic Recordings - HP Codemaster 100 User Manual

Automatic Recordings

As described in Table 2-2 on page 2-12, you can enable or disable any of the
following automatic recordings:
• Record on Mark
• Record on Charge
• Record on Shock
• Record on Alarms
The automatic recordings for both delayed and non-delayed recorder modes
of operation are defined in Table 5-6. All event summaries (except for shock
advisory) are 3 seconds pre- and 8 seconds post-events. If in delayed mode,
each event prints with a 6 second pre-event strip prior to the event.
Table 5-6 Automatic Recordings
Event
Mark
Delayed mode
Post-event time
Non-Delayed mode
Post-event time
Recording
5-11