Set Up A Wireless Access List By Mac Address - NETGEAR R6100 User Manual

The Router's PIN field displays the PIN that you use on a registrar (for example, from the
Network Explorer on a Vista Windows computer) to configure the router's wireless
settings through WPS.
3. (Optional) Select or clear the Disable Router's PIN check box.
The PIN function might temporarily be disabled when the router detects suspicious
attempts to break into the router's wireless settings by using the router's PIN through
WPS. You can manually enable the PIN function by clearing the Disable Router's PIN
check box.
4. (Optional) Select or clear the Keep Existing Wireless Settings check box.
By default, the Keep Existing Wireless Settings check box is selected. NETGEAR
recommends that you leave this check box selected.
If you clear this check box, the next time a new wireless client uses WPS to connect to
the router, the router wireless settings change to an automatically generated random
SSID and security key.
5. Click the Apply button.
Your changes are saved.

Set Up a Wireless Access List by MAC Address

You can set up a list of computers and wireless devices that are allowed to join the wireless
network. This list is based on the unique MAC address of each computer and device.
Each network device has a MAC address, which is a unique 12-character physical address,
containing the hexadecimal characters 0–9, a–f, or A–F only, and separated by colons (for
example, 00:09:AB:CD:EF:01). Typically, the MAC address is on the label of the wireless
card or network interface device. If you do not have access to the label, you can display the
MAC address using the network configuration utilities of the computer. You might also find
the MAC addresses in the Attached Devices screen.

To restrict access based on MAC addresses:
1. Select ADVANCED > Advanced Setup > Wireless Settings.
2. Scroll down to display the Set Up Access List button.
3. Click the Set Up Access List button.
R6100 WiFi Router
Advanced Settings
83