Table of Contents
Advertisement
•
Is your computer or wireless device trying to connect to your network with its old
settings (before you changed the settings)? If so, update the wireless network
selection in your computer or wireless device to match the current settings for your
network.
You can use this screen to view or change the wireless network settings and the security
option.
Wireless Network Settings
•
Region. The location where the router is used. Select from the countries in the list. In the
United States, the region is fixed to United States and is not changeable.
•
Enable SSID Broadcast. This feature allows the router to broadcast its SSID so wireless
stations can see this wireless name (SSID) in their scanned network lists. This check box
is selected by default. To turn off the SSID broadcast, clear this check box, and click the
Apply button.
•
Name (SSID). The SSID is also known as the wireless network name. Enter a
32-character (maximum) name in this field. This field is case-sensitive. The default SSID
is randomly generated, and NETGEAR strongly recommends that you do not change this
setting.
•
Channel. The wireless channel the gateway uses. Enter a value from 1 through 13. (For
products in the North America market, only Channels 1 through 11 can be operated.) Do
not change the channel unless you experience interference (shown by lost connections or
slow data transfers). If this happens, experiment with different channels to see which is
the best.
•
When you use multiple access points, it is better if adjacent access points use different
radio frequency channels to reduce interference. The recommended channel spacing
between adjacent access points is 5 channels (for example, use Channels 1 and 6, or 6
and 11).
•
Mode. Up to 300 Mbps is the default setting, which allows 802.11n and 802.11g wireless
devices to join the network. The other settings are Up to 54 Mbps, and Up to 145 Mbps.
•
Security Options. The router comes with unique preset wireless security. These settings
are on the product label. NETGEAR recommends that you use preset security so that you
can refer to the label if you forget the WiFi password. However, you can change the
security option and passphrase.
Wireless Security Options
A security option is the type of security protocol applied to your wireless network. The
security protocol in force encrypts data transmissions and ensures that only trusted devices
receive authorization to connect to your network. Wi-Fi Protected Access (WPA) has several
options including pre-shared key (PSK) encryption.
WPA encryption is built into all hardware that has the Wi-Fi-certified seal. This seal means
that the product is authorized by the Wi-Fi Alliance (http://www.wi-fi.org/) because it complies
with the worldwide single standard for high-speed wireless local area networking.
R6100 WiFi Router
Basic Settings
26
Hide quick links:
Advertisement
Table of Contents
