Cisco Prisma II Technical Bulletin page 16

2.5g 2:1 bdr-i receiver and chassis issue

Hide thumbs Also See for Prisma II:

Table of Contents

Setting Up An FTP Server

15 Select the new ftproot folder and then click all of the check boxes in the

Properties window so that all of the values read TRUE as shown above.

Result: The ftproot folder is added to the root for the current user.

16 Proceed as follows:

a. Click the browse button

Result: The Browse for Folder window appears.

b. Browse to My Computer, then to Local Disk (C:), then to ftproot, and then

select the folder named dload.

c. Click OK.

17 Click the Add to Root button

dialog box.

Result: The dload folder is added to the folder list.

18 Select the new dload folder and then click all of the check boxes in the Properties

window so that all of the values read TRUE.

Result: The dload folder is added to the root for the current user.

in the "Virtual Root Directory for:" dialog box.

in the "Virtual Root Directory for:"

78-4032387-01 Rev C

Table of Contents