Cisco Prisma II Technical Bulletin page 14

Setting Up An FTP Server
8 Using Windows Explorer, examine the C drive, and check for the presence of a
folder named "ftproot". If the ftproot folder exists, open it and check that it
contains a sub-folder named "dload".
If these folders do not exist, create the following folder structure:
C:\ftproot\dload\
Restart the Cerberus FTP Server program.
9
Result: The Cerberus FTP Server main screen appears.
10 Click Configuration from the main screen and then choose User Manager.
Result: The following screen appears (with user Anonymous selected).
Important: Make sure the Simple Directories check box is unchecked.
11 If the user "ftp" does not appear in the Cerberus User Accounts window as
shown above, click the New button and create a new user named "ftp". If user
"ftp" does appear, go to step 12.
12 Proceed as follows:
a. Select the user named "ftp" in the Cerberus User Accounts window.
b. Double-click Password in the Properties window.
c. Enter the password "@ftp", and re-type it to confirm.
d. Click OK.
14 78-4032387-01 Rev C