About This Manual - Cisco 700 Series Configuration Manual

About This Manual

This chapter discusses the organization, related documentation, and conventions of the
Cisco 700 Series Router Configuration Guide.
This document is organized as follows:
•
Chapter 1, "Overview," provides a brief overview of Cisco IOS-700 software and
supported protocols.
•
Chapter 2, "Using Profiles with Cisco 700 Series Routers," describes a set of
user-defined parameters grouped in a customized profile and associated with a specific
remote device.
•
Chapter 3, "Basic Configurations," describes how to connect a Cisco 700 series router
to an Internet service provider (ISP) or to a central site, such as your company network.
•
Chapter 4, "Using CHAP," describes how to connect a Cisco 700 series router to a
router running Cisco IOS software.
•
Chapter 5, "Configuring DHCP Relay, DHCP Server, and PAT," describes how to
configure Dynamic Host Configuration Protocol (DHCP) relay, DHCP server, and Port
Address Translation (PAT) on the Cisco 700 series router.
•
Chapter 6, "Configuring Remote CAPI," describes how to configure Remote Common
Application Programmers Interface (CAPI) and the ISDN Device Control Protocol
(ISDN-DCP) on the Cisco 700 series router.
•
Appendix A, "Token Card and Cisco Secure Authentication Support," describes the
Token Card and Cisco Secure Authentication Support security features.
About This Manual vii