Remote Cisco 765 Command Summary - Cisco 700 Series Configuration Manual

Remote Cisco 765 Command Summary

Following is the command summary to configure the remote Cisco 765 series router for IP
static routing with PAP authentication:
set switch 5ess
set 1 dir directory_number
set 2 dir directory_number
set system 765
set multidestination on
set ppp multi on
set ppp authentication in pap
set ppp authentication out pap
cd lan
set ip address 192.168.147.9
set ip netmask 255.255.255.248
set ip routing on
set ip rip update periodic
set ip rip receive v2
set ip rip version 2
set user 4500
set ip route destination 0.0.0.0 gateway 172.16.125.1 propagate on
set ip address 172.16.125.7
set ip netmask 255.255.255.0
set ip routing on
set ip framing none
set ppp clientname 765
set ppp password client
set ppp password host
set number 5558011
set bridging off
set timeout 360
set active
reboot
For detailed information regarding the commands listed here, refer to the Cisco 700 Series
Router Command Reference.
Remote Cisco 765 Command Summary
Using CHAP 4-7