Remote Cisco 765 Command Summary - Cisco 700 Series Configuration Manual

Remote Cisco 765 Command Summary

Following is the command summary to configure the remote Cisco 765 series router for IP
static routing with CHAP and MLP:
set switch 5ess
set 1 dir directory_number
set 2 dir directory_number
set system 765
set multidestination on
set ppp multilink on
set ppp authentication incoming chap
set ppp authentication outgoing chap
cd lan
set ip address 192.168.147.9
set ip netmask 255.255.255.248
set ip routing on
set ip rip update periodic
set user 4500
set ppp secret client
set ip address 172.16.125.7
set ip netmask 255.255.255.0
set ip routing on
set ip framing none
set ip route destination 0.0.0.0 gateway 172.16.125.1 propagate on
set number 5558011
set bridging off
set ip rip update off
set ppp secret host
set timeout 360
demand 2 threshold 32 duration 5
set active
reboot
Note
recommended when connecting to Ascend 4000 or NAS routers.
For detailed information regarding the commands listed here, refer to the Cisco 700 Series
Router Command Reference.
The set ppp authentication outgoing chap command in this example is not
Remote Cisco 765 Command Summary
Using CHAP 4-5