PAT with IPCP Single-Destination Negotiation Example
PAT with IPCP Single-Destination Negotiation Example
This section describes how to configure a remote Cisco 700 series router for PAT with IPCP
single-destination negotiation to a central-site router running Cisco IOS software.
Figure 5-4 is an illustration of the configuration used in this example.
Figure 5-4
PAT with IPCP Single-Destination Negotiation
Internal
profile
FTP
server
ISDN network
10.0.0.1
Cisco 765
Cisco 4500
PAT on
IPCP negotiated
A
10.0.0.2
address assigned
Private
Public
network
network
Configuring DHCP Relay, DHCP Server, and PAT 5-9