Verify The Configuration; Dhcp Server With Ipcp Negotiation Example - Cisco 700 Series Configuration Manual

Verify the Configuration

You can use the show ip configuration and show ip route commands to see the IPCP
negotiation address.
You can use the show dhcp configuration command to see the IP address returned by
DHCP.

DHCP Server with IPCP Negotiation Example

This section describes how to configure a remote Cisco 700 series router as a DHCP server
with IPCP negotiation to a central-site router running Cisco IOS software.
Figure 5-3 is an illustration of the configuration used in this example.
Figure 5-3
DHCP
client
DHCP Server with IPCP Negotiation
DHCP
server
Cisco 765
Configuring DHCP Relay, DHCP Server, and PAT 5-7
Verify the Configuration
ISDN network
Cisco 4500