Dual Access Cards; Dual Focus (Card Held); Timed Anti-Passback - Honeywell Galaxy 3-48C Installation Manual

Galaxy 3 Series Installation Manual
Dual Card Access/Focus

Dual Access Cards

If a user's card number is assigned a *, then the card becomes Dual access. This means that it will not open
the door on its own; it needs another PIN or card as well. If the PIN belonging to the same user has a #
assigned, then that PIN must be entered first before access will be granted to that card.
If the PIN has no # assigned, then the card will work only in conjunction with any other Dual Access card that
shares one or more groups (see option 42 = Codes for programming).

Dual Focus (Card Held)

If a card has a # assigned to the number, then any card-held function will only work in conjunction
with the PIN from the same user, provided that the PIN has a # assigned also. The Dual Focus function
will work in either order, but if the card is presented first, it will simply enable the PIN to gain access
to the normal menu (see option 42 = Codes for programming).

Timed Anti-Passback

When the Timed Anti-Passback feature is enabled, it will prevent more than one use of any particular card at a
particular reader within a given time period. See option
63.2.3.6 = Options.MAX.Max Parameters.Anti-Passback for programming details.
A forgiveness function is available to clear all or particular antipassback restrictions in force. There are
set Anti-Passback users as defined in the following Table. If a card belonging to one of these users is
swiped at a reader, all anti-passback restriction at that reader are cleared. A manager code can authorise
a forgive function on a particular user in option 42.1 = Codes.User Codes. An engineer code can
authorise a forgive function on a particular reader in option 63.2.3.6 = Options.MAX.Max
Parameters.Anti-Passback.
5-7