Relay Module; Technical Specification - Output Module; Technical Specification - Relay Module - Honeywell Galaxy 3-48C Installation Manual

Galaxy 3 Series Installation Manual

Relay Module

Up to four Relay Modules can be connected to the Output Module at connectors RM1 to RM4. The Relay
Module increases the maximum current load of one output up to 4 A.
Jumpers JP1 to JP4 are used for setting up the output mode. These can either be set to NO (Normally Open)
when the jumper is on the left and middle pin, or NC (Normally Closed).
Relay Module
4
NC NO NC

Technical Specification - Output Module

Output Module (boxed)
Dimensions:
Operating temperature:
Operating voltage:
Current consumption:
Maximum current load:

Technical Specification - Relay Module

Dimensions:
Power supply:
Operating temperature:
Current consumption:
Output load:
3 2 1
NO NC NO NC NO
CN3
4 positions
(RM1 - RM4)
Figure 3.4. Location of Relay Module
Breadth: 162 mm
Length: 150 mm
Height: 39 mm
-10 deg. C to +40 deg. C
10.5V dc to 15V dc
Quiescent: 45mA
Maximum: 250mA (with LED's and relay modules)
400mA
Breadth: 50 mm
Length: 30 mm
Height: 20 mm
Through Output Module (12V)
-40 deg. C to +85 deg. C
15mA
4A/230Vac
Output Module (cont'd)
RM3
Output Module
3-11