Kenmore 79053 Service Manual page 26

2.14 AIR HANDLING PARTS
2.14.1 COVER (AT THE TOP)
1. Remove the front grille. (Refer to section 2.13.1)
2. Remove the cabinet. (Refer to section 2.13.2)
3. Remove 11 screws which fasten the brace and
covers.
4. Remove the covers and the brace.
(See Figure 60)
5. Re-install the components by referring to the
removal procedure, above.
Figure 60
2.14.2 BLOWER
1. Remove the cover. (Refer to section 2.14.1)
2. Remove the 3 screws which fasten the evaporator
at the left side and the top side.
3. Move the evaporator sideward carefully.
4. Remove the orifice from the air guide carefully.
5. Remove the clamp which secures the blower with
plier. (See Figure 61)
6. Remove the blower with plier or your hand without
touching blades. (See Figure 62)
7. Re-instaU the components by referring to the
removal procedure, above.
Figure 61
Figure 62
2.14.3 FAN
1. Remove the cabinet. (Refer to section 2.13.2)
2. Remove the brace and shroud cover.
(Refer to section 2.14.1)
3. Remove the 5 screws which fasten the condenser.
4. Move the condenser sideways carefully.
5. Remove the clamp which secures the fan.
6. Remove the fan. (See Figure 63)
7. Re-install the components by referring to the
removal procedure, above.
Figure 63
---26--