Kenmore 79053 Service Manual page 16

2.6 AIR HANDLING PARTS
2.6.1 AIR GUIDE
1. Remove the front grille. (Refer to section 2.5.1)
2. Remove the cabinet. (Refer to section 2.5.2)
3. Pull the cover E.P.S upward.
4. Remove 3 screws which fasten the UPPER AIR
GUIDE
5. Push the two hooks which fasten the UPPER AIR
GUIDE and remove the UPPER AIR GUIDE.
6. Re-install the components by referring to the
above removal procedure.
Figure 24
2.6.2 BLOWER
1. Remove the air guide. (Refer to section 2.6.1)
2. Move the evaporator sideward carefully.
3. Remove the clamp which secures the blower with
a hand plier, (See Figure 26)
4. Remove 2 screws which fashen the motor mount.
5. Pull the blower forward by dragging the motor
mount upward carefully.
6. Remove the blower.
7. Re-install the components by referring to the
removal procedure, above.
Figure 25
Figure 26
Figure 27
--16---