Dell 1600n - Multifunction Laser Printer B/W Service Manual page 52

5.6 ADF Motor Ass'y
1. Before you remove the ADF Motor Ass'y, you should
remove:
- Rear Cover (see page 5-2)
- Side Cover (LH, RH) (see page 5-3)
- Scanner Ass'y (see page 5-5)
2. Remove the 2 screws securing the ADF Ass'y and
remove it.
ADF Ass'y
3. Remove the Open Cover, as shown below.
Open Cover
4. Pull the White Bush, then rotate it until it reaches the
slot, as shown below. Then lift the Pick-Up Ass'y out.
Pick up Ass'y
5. Remove the 2 screws securing the Upper Cover and
remove it, as shown below.
Upper Cover
6. Unplug the one connector and remove 5 screws
securing the ADF Motor Ass'y. Then take out the ADF
Motor Ass'y.
Bushing
ADF Motor Ass'y
ADF Lower Ass'y
Precautions
Service Manual
5-9