Table of Contents
Advertisement
4.3.4
Storage Configuration
The items in this menu allow you to set or change the configurations for the
IDE/SATA devices installed in the system. Select an item then press <Enter> if you
wish to configure the item.
Main
Storage Configuration
OnChip SATA Channel
SATA Port1- Port4
SATA Port5- Port6
OnChip SATA Channel [Enabled]
Configuration options: [Disabled] [Enabled]
SATA Port1-Port4 [IDE]
Sets the configuration for the Serial ATA connectors.
Configuration options: [IDE] [RAID] [AHCI]
SATA Port5-Port6
Setting this item to [IDE] allows the system to recognize the optical drives
connected to the SATA connectors 5/6 when installing OS.
Configuration options: [IDE] [RAID] [AHCI]
If SATA Port1-Port4 is set to [IDE], SATA Port5-Port6 can only be configured as
[IDE]
4-12
[Enabled]
[IDE]
[IDE]
v02.61 (C)Copyright 1985-2010, American Megatrends, Inc.
BIOS SETUP UTILITY
Options
Disabled
Enabled
Select Screen
←→
Select Item
↑↓
+-
Change Option
F1
General Help
F10
Save and Exit
ESC
Exit
Chapter 4: BIOS setup
Advertisement
Table of Contents
