Table of Contents
Advertisement
8.
SSI power connectors (24-pin ATXPWR1, 8-pin ATX12V1, 8-pin ATX12V2)
SSI power connectors (24-pin ATXPWR1, 8-pin ATX12V1, 8-pin ATX12V2)
These connectors are for SSI power supply plugs. The power supply plugs
are designed to fit these connectors in only one orientation. Find the proper
orientation and push down firmly until the connectors completely fit.
•
•
•
9.
Location LED cable connector (3-pin LOCLED1)
This connector is for a LED cable that allows you to know the server location.
2-34
Do not forget to connect the 24+8+8-pin power plugs; otherwise, the system
will not boot up.
Use of a PSU with a higher power output is recommended when configuring
a system with more power consuming devices. The system may become
unstable or may not boot up if the power is inadequate.
You must install a PSU with a higher power rating if you intend to install
additional devices.
Chapter 2: Hardware information
Advertisement
Table of Contents
