Table of Contents
Advertisement
4.6.5
APM Configuration
Power On Configuration
Restore on AC Power Loss
Resume On PCIE Wake#
Resume On Ring
Resume On RTC Alarm
Restore on AC Power Loss [Last State]
When set to [Power Off], the system goes into off state after an AC power loss.
When set to [Power On], the system will reboot after an AC power loss. When set
to [Last State], the system goes into either off or on state, whatever the system
state was before the AC power loss.
Configuration options: [Power Off] [Power On] [Last State]
Resume On PCIE Wake# [Disabled]
Allows you to enable or disable the PCIE devices to generate a wake event.
[Disabled]
[Enabled]
Resume On Ring [Disabled]
Allows you to enable or disable the Ring to generate a wake event.
[Disabled]
[Enabled]
Resume On RTC Alarm [Disabled]
Allows you to enable or disable RTC to generate a wake-up event.
Configuration options: [Disabled] [Enabled]
4-30
[Last State]
[Disabled]
[Disabled]
[Disabled]
v02.61 (C)Copyright 1985-2010, American Megatrends, Inc.
Disables the PCIE devices to generate a wake event.
Enables the PCIE devices to generate a wake event.
Disables the Ring to generate a wake event.
Enables the Ring to generate a wake event.
BIOS SETUP UTILITY
Power
Options
Power On
Power Off
Last State
Select Screen
←→
Select Item
↑↓
+-
Change Option
F1
General Help
F10
Save and Exit
ESC
Exit
Chapter 4: BIOS setup
Advertisement
Table of Contents
