Philips 60PP9701 Instructions For Use Manual page 44

your remote control is set to
ork your TV and many
infrared remote (IR) control
VCRs, Cable TV Converter
Boxes, DVD players, Home
Satellite receivers, etc.
However, an easy one-time step
may be necessary before the
remote will work with your
accessory device.
To begin, try this initial check to
see if going on to the following
section is necessary.
<_ Press the VCR
or
ACC(essory) System button on
the TV remote for the desired
accessory device category.
Note: The ACC(essory) system
button contains product codes
for Cable TV Converters, .I2VD
players, and Satellite receivers.
_ Point the TV remote toward
the desired accessory device and
press the POWER button.
<_ Does the remote turn the
accessory device ON?
IF YES, O and try other
function buttons on the TV
remote. If they also work the
accessory device, then the
remote is ready and no further
steps are needed.
If NO, continue...
TV REMOTE
VCR/ACCESSORY
SYSTEM BU'ITONS
VCR
SATELLITE
RECEIVER
CABLECONVERTER
!\ • '
<_ First look a THREE-DIGIT
up
remote code number for your
brand of Accessory Device before
going through the simple Direct
Access Method steps shown on
the following page.
Find your Three Digit Code
Number on pages 45-46.
44