Philips 60PP9701 Instructions For Use Manual page 30

[:2
W;uld you like to hear TV
rograms through _'our attdio
hi-fi system? The TV's Variable
Audio Output jacks and TV
Speaker On/Off control work
together to offer you tltis TV souttd
option.
Connect the R(ight) and L(eft)
VARIABLE AUDIO OUT jacks
on the TV to the R and L Audio
Input jacks on your amplifier or
sound system.
Set the audio system's volume to
normal listening level.
_,g_ Turn the TV and audio system
ON. You can now adjust the sound
level coming from the audio
system with the Volume &Y
buttons on the TV or remote.
/3_,_ To hear the TV sound from only
the audio system speakers, select
TV SPEAKERS control.
With SOUND MENU (2 of 3) on
screen, move the RED _highlight
with the outer MENU (C_ ,ring
buttons. Then press the center
MENU button to select the feature.
<_ Press ring and
the MENU
center MENU buttons to
highlight and turn OFF (u') the TV
SPEAKERS control.
You should now only hear TV
sound coming from the audio
system speakers.
<_ Press button to
the STATUS
clear the screen.
@
Remember, the audio
tsystem may have to be in
AUX(iliary) mode to play sound
from the TV (Outputs).
Note: When the TV SPEAKER
control is set to "NORMAL" (for
TV speaker operation) make sure
the VARIABLE AUDIO OUTPUT
control (see next page) is also set
to "STEREO" in order for the TV's
AUDIO OUTPUT jacks to work
properly.
BACK OF TV
®®®
®®®
®®®
® @ @
AUI)IO IN
(RI I)fiVH[] 1!)
®®
AUDIO SYSTEM
NOTE: The TV's FIXED
AUDIO OUTPUT jacks can
also be used for the playback
afTV program sound with an
external audio amplifier, or
home theater hi-fi system,
Connection of the FIXED
AUDIO OUT(puts) is similar
to the Variable Audio Outputs
(as shown above). However,
specific sound level
adjustments will be made with
the controls at the external
amplifier or home sound
system (instead of through the
TV's audio level controls.)
NOTE: The TV's PIP
AUDIO OUTPUT jacks can
also be used for additional
stereo playback options such
as wireless transmitter
headphone hook-up, or as an
external amplifier connection
source. However, with normal
PIP feature operations (when
the ANT A and ANT B Input
sources are connected tk)r
use), the PIP AUDIO
OUTPUTs will switch from
stereo to monaural (mono)
sound. Stereo sound will only
be available with the TV's
Main screen (or ANT A
supplied signal) at that time.
3O