Download Print this page

Philips 60PP9701 Instructions For Use Manual page 31

Hd widescreen tv
Hide thumbs Also See for 60PP9701:

Advertisement

By
adding optional external
speakers to the TV's sound
system, you can create the feeling
of reflected sound that surrounds
you at a movie theater or concert
hall.
<_
Connect both external
speakers to the speaker wire
terminals on the TV.
Recommended
speakers: 8 ohm, 15
watt minimum. Be sure the (+) and
(-) speaker wires are connected to
the correct R(ight) and L(eft)
speaker terminals on the TV.
_
Place the speakers so the
viewing area is between the TV
and the rear surround speakers.
(See overhead view drawing.)
<_
Turn TV ON and place the
STEREO control to the "STEREO
IF AVAILABLE" (t_") position.
After setup whenever a stereo
signal is received the audio will be
heard in Surround Sound.
O
REAR SURROUND
SOUND
SPEAKER
TERMINALS
SUBWOOFER
OUTPUT
plug connector) to send the
subwoofer audio channel signal (at
line level) to an optional external
powered Subwoo fer speaker. The
Subwoofer
audio signal is for the
playback of only the lowest
frequency notes (under 100 Hz).
REAR SURROUND SOUND SPEAKERS
Note: The rear Surround Sound speakers will not
be heard at the same volume level as the front TV
lower volume level than the TV's front speakers.
speakers. It is intended for the rear speakers to
give a background
noise effect which requires a
BACK
OF TV
Remember,
g
Surround Sound
will not work with
only one speaker
connected; or with
monaural audio
material (unless
Variable Audio
Surround control is
turned ON - see
section below).
TV
SUBWOOFER
REAR SPEAKER
PRIMARY
VIEWING
AREA
IdiO_llPllal a BlgllIIllil
Oil
Tjhe
TV's Variable Audio Output
acks can also be used for
Surround Sound. Once they are
connected to an external hi-fi
system its speakers can be used for
the playback of Surround Sound.
_V
Connect
R(ight)
L(eft)
the
and
ARIABLE AUDIO OUT jacks
on the TV to the R and L Audio
Inputjacks on your amplifier or
sound system.
<_
Turn TV ON and place the
VARIABLE AUDIO OUTPUT on
screen control to the SURROUND
(tJ) position. (Sound Menu 3 of 3).
Note:This will change the
Left/Right channel audio line level
signal at the Audio Output jacks to
the same signal found at the TV's
Surround Sound Speaker terminals.
O
_
_
BACK OF TV
VARIABLE
AUDIO
OUTPUT J_ItCKS
_
AUDIO
INPUT JACKS
AUDIO SYSTEM SPEAKERS USED AS REAR
SURROUND
SOUND SPEAKERS
3_

Advertisement

loading

This manual is also suitable for:

55pp9701