Philips 60PP9701 Instructions For Use Manual page 37

Tohe Audio/Video Output jacks
n the TV can be used to
record TV prograrns on VCRs
which have Audio/Video Input
jacks.
To record TV programs by using
the Audio/Video jacks on the TV:
<_ Connect the OUT jack
VIDEO
from the TV to the VIDEO IN jack
on the VCR.
_ Connect the AUDIO OUT
jacks R(ight) and L(eft) from the
TV to the AUDIO IN jacks on the
VCR.
<_ Select the "ANTENNA A"
Picture Source control on the TV.
Press the A/V button on'be remote
(or the Source Select button on the
front of the TV) to display the
TV's Input Source control screen.
Press the MENU ring _ and
center MENU buttons to highlight
and select (tJ) the ANTENNA A
mode,
<_ Select the channel the TV on
that you want to record.
_Turn the VCR ON. Put a
cassette tape in the unit and place
the VCR in the RECORD mode.
O
PICTURE AND SOUND BEING RECORDED
ON VCR.
@®
®®
®®
e@
/__BACK OF TV
AUDIO/VIDEO INPUT
JACKS ON VCR
VCR
Remember, If the VCR
has an INPUT SELECTOR
switch, place it in the LINE or
CAMERA position.
Unattended Timer Recordings
with a VCR are possible, but not
recommended with this
connection since the TV must be
left ON for the VCR to record.
37