Philips 60PP9701 Instructions For Use Manual page 14

uto-Programming (see
page) adds all the
channels it can find (on your
Antenna or Cable TV system) into
the TV's mentor?,'. Add/Delete
Channels makes it easy for you to
add other channels, or drop
unwanted channels, from the list o
channels in the TV's memory.
_ Select CHANNEL MEMORY
(ADD/DELETE CHANNELS)
control.
With the FEATURES MENU on
screen, move the RED highlight
with the outer MENU ring_(_))
buttons. Then press the center
MENU button to select the feature.
<_ Press the CHANNEL &Y or
number buttons to select the
channel you want to a_d or delete.
_ Press the outer MENU
ring button (on the Right) to
ADD the channel into the TV's
memory.
Press the outer MENU ring button
(on the Left) to DELETE the
channel from memory.
Repeat steps 2 and 3 for each
channel you wish to add or delete•
<_ Press the STATUS or MENU
button to clear the screen when
through.
Remember. A separate
ADD/DELETE CHANNEL
memory may also be created for
the ANT(enna) B Input on the rear
of the set (if an Antenna or Cable
TV signal has been connected).
Press the "SOURCE" button on
the remote, while in the
ADD/DELETE CHANNEL
mode, to switch between the ANT
A and ANT B channel memory
lists. Then follow steps 2 and 3 as
shown to the left to add or delete
the desired channels.
-- MAIN MENU
®®
®®
®
e @ @
FEATURE MENU --
CHANNEL MEMORY
Channel lg Added
,_LEb_r CHANNEL
(_0 to DELETE CHANNEL
for" ANT B
when FINISHED
w