Advertisement
Installing or removing saw blade
CAUTION
:
Always be sure that the tool is switched off and unplugged before installing or removing
the blade.
The saw blade
ha5
not been mounted on
the saw
a t
the factory, but has been packed
separately in the same carton. To install
the blade, carefully
follow the procedure
outlined below
:
Hold the outer flange with the wrench and
loosen the hex bolt counterclockwise with
the socket wrench. Then remove the hex
bolt and outer flange.
Place the saw blade on the shaft (arbor),
making sure that the blade teeth point for-
ward in the same direction
as
the tool rota-
tion (the arrow on the blade should point
in the same direction as the arrow on the
tool). Replace the outer flange and hex
bolt over the blade and TIGHTEN THE
HEX BOLT SECURELY in
a
CLOCKWISE
direction.
CAUTION
:
.Use only the Makita wrench and socket
wrench to install or remove the blade.
position
the recessed side
of
the inner
flange on the blade side when mounting.
Outer
flange
\
Inner flange
\
'-
I
Fig. 8
I
Fig.
S
Fig. 1(
To remove the blade, follow the installation procedure in reverse.
7
Advertisement
