Makita 9300 Instruction Manual page 11

2. Loosen thumb screws and move blade in
closer to the grinding wheel. Make sure
blade lies flat on top of the inclining
tool rest. Secure thumb screws.
3. Using the two adjust screws (6, C)
on
the right side, work the sliding rod side-
ways until the tip of the saw blade just
contacts the side of the grinding wheel.
Secure blade with adjust screws so that
uniform stock (teeth tips) removal will
result.
3. Rotate the saw blade in clockwise direc-
tion after switching on the tool, cutting
blade teeth to uniform height. This
jointing step evens up the circumference
of the blade. Switch off grinder.
11