Honeywell VFD CORE Installation Instructions Manual page 182

CHAPTER 12: DESCRIPTION OF PARAMETER SETTINGS
54: Communication error (CE1)
55: Communication error (CE2)
56: Communication error (CE3)
57: Communication error (CE4)
58: Communication Time-out (CE10)
59: PU Time-out (CP10)
60: Brake transistor error (bF)
61: Y-connection/?-connection switch error (ydc)
62: Decel. Energy Backup Error (dEb)
63: Slip error (oSL)
64: Reserved
65: Reserved
66~72: Reserved
73: External safety gate S1
74: Fire Fault
75~78: Reserved
79: Uocc U phase over current (Detection begins as RUN is pressed,
80: Vocc V phase over current (Detection begins as RUN is pressed,
81: Wocc W phase over current (Detection begins as RUN is pressed,
82: OPHL U phase output phase loss
83: OPHL Vphase output phase loss
84: OPHL Wphase output phase loss
85~100: Reserved
101: CGdE CANopen software disconnect1
102: CHbE CANopen software disconnect2
103: CSYE CANopen synchronous error
104: CbFE CANopen hardware disconnect
105: CIdE CANopen index setting error
106: CAdE CANopen slave station number setting error
107: CFrE CANopen index setting exceed limit
• When the fault occurs and force stopping, it will record in this parameter.
• At stop with low voltage Lv (LvS warn, no record). During operation with mid-low voltage Lv (LvA, Lvd, Lvn error, will record).
• Setting 62: when dEb function is enabled, the drive will execute dEb and record to the Pr.06-16 to Pr.06-21 simultaneously.
63-4528—04
software protection)
software protection)
software protection)
182