Honeywell VFD CORE Installation Instructions Manual page 144

CHAPTER 12: DESCRIPTION OF PARAMETER SETTINGS
• It is for digital input terminal signal delay and confirmation. The delay time is confirmation time to prevent some uncertain
interference that would cause error in the input of the digital terminals. Under this condition, confirmation for this parameter
would improve effectively, but the response time will be somewhat delayed.
02 - 12 Multi-function Input Mode Selection
Settings
• The setting of this parameter is in hexadecimal.
• This parameter is to set the input signal level and it won't be affected by the SINK/SOURCE status.
• Bit0 is for FWD terminal, bit1 is for REV terminal and bit2 to bit15 is for MI1 to MI14.
• User can change terminal status by communicating.
For example, MI1 is set to 1 (multi-step speed command 1), MI2 is set to 2 (multi-step speed command 2). Then the forward +
nd
2 step speed command=1001(binary)= 9 (Decimal). Only need to set Pr.02-12=9 by communication and it can forward with
nd
2 step speed. It doesn't need to wire any multi-function terminal.
Bit15 bit14 bit13 bit12
MI14 MI13 MI12 MI11
02 - 13 Relay1: Multi Output Terminal
02 - 14 Relay2: Multi Output Terminal
02 - 15 Relay3: Multi Output Terminal
02 - 16 Multi-output Direction
Settings
• The setting of this parameter is in hexadecimal.
• This parameter is set via bit setting. If a bit is 1, the corresponding output acts in the opposite way. For example: If Pr02-13=1,
Relay 1 is open when the drive runs and is closed when the drive is stopped
Bit15 bit14 bit13 bit12
MO20 MO19 MO18 MO17 MO16 MO15 MO14 MO13 MO12 MO11 MO10 MO2
02 - 17 Terminal count value attained (returns to 0)
Settings
• The counter trigger can be set by the multi-function terminal MI6 (set Pr.02-06 to 23). Upon completion of counting, the
specified output terminal will be activated (Pr.02-13~02-14, Pr.02-34, 02-35 is set to 18). Pr.02-17 can't be set to 0.
• When the display shows c5555, the drive has counted 5,555 times. If display shows c5555l it means that real counter value is
between 55,550 to 55,559.
63-4528—04
0~65535 (0:N.O.; 1:N.C.)
bit11 bit10 bit9 bit8
MI10 MI9 MI8 MI7
0~65535 (0:N.O.; 1:N.C.)
bit11 bit10 bit9 bit8
0~65500
bit7 bit6 bit5 bit4
MI6 MI5 MI4 MI3
bit7 bit6 bit5 bit4
144
Factory Setting: 0
bit3 bit2 bit1 bit0
MI2 MI1 REV FWD
Factory Setting: 11
Factory Setting: 1
Factory Setting: 9
Factory Setting: 0
bit3 bit2 bit1 bit0
MO1 ?? RY2 RY1
Factory Setting: 0