Sony RDR-VX555 Operating Instructions Manual page 26

Checkingthe cable box/satellite
receiver control setting
1
Turn on the recorder and the cable box/
satellite receiver.
2
Pointthe recorder'sremote atthe recorder
(not at the cable box/satellitereceiver).
3 Press CH+/- and checkthat the channel
changesonthe cable box/satellitereceiver
window.
Press the number buttonsand checkthat
the channelchangesonthe cable box/
satellite receiver window.
If you cannot get the recorder to control your
cable box/satellite receiver
Check the settings at "Set Top Box Control' in
"Features" setup (page 101).
Check the connection and place the set top box
controller near the cable box/satellite receiver
(page 12).
If your cable box or satellite receiver still does not
operate with this recorder, contact your cable or
satellite company to see if they can provide you
with a compalible cable box or satellite receiver.
To fix the set top box controller to your cable
box/satellite receiver
Once you have confirmed that the set top box
controller controls your cable box or satellite
receiver, affix it in place.
1 Attach the supplied double-sided tape to the
set top box controller.
Remove the backings on the double-sided
tape.
Affix it so lhal the set lop box controller is
[lear the relllote control SelISOF OU your
cable
box/salellite receiver.
i
26