Mitsubishi WS-A48 Owner's Manual page 55

Part IV: Operation
Remote Control Functions: Care and Operation
F,_E_ T_L_y FF_
Figure I. Remote Control Functions.
[]
Fq_
L_LJ
Figure 2. Installing the batteries.
size AAA
batteries
Operation
Installing the Batteries:
(Figure 2)
[] Remove the remote control's back cover
by gently pressing the ridged tab in the
direction of the arrow and sliding off the
cover.
[] Load the batteries, making sure the
polarities (+) and (-) are correct.
For Best Results from the Remote
Control:
m. Be within 20 feet of the equipment.
... Do not press two or more buttons at the
same time unless instructed to.
... Do not allow to get wet or become heated.
...'q Avoid dropping on hard surfaces.
... Do not use harsh chemicals to clean. Use
only a soft, lightly moistened cloth.
-.- Do not mix new and old batteries.
... Do not heat, take apart, or throw batteries
into fire.
... Use only AAA batteries.
Operating the Remote Control:
You can use the remote to control the TV,
CABLE/DBS/DTV, VCR, DVD, and AUDIO
products. Select the product you want to
control by moving the slide switch ( [] of
Figure 1) to the appropriate position. The
remote control has been preset to operate
the TV and other Mitsubishi products. To pro-
gram the remote control to operate other prod-
ucts, see Use of the Remote Control with Other
A/V Products, pages 26-27.