Mitsubishi WS-A48 Owner's Manual page 26

Use of the Remote Control with Other A/V Products
To Program the Remote to Control
Other Brands of Audio and Video
Products:
(Figures 1-5)
[]
[]
[]
[]
Move the slide switch at the top of the
remote to the product you want to control.
Press and hold the POWER button on the
remote control.
Enter the first three digit code listed for your
equipment, and then release the POWER
button on the remote control.
Point the remote control to the equipment
and press the POWER button.
Note: If the equipment responds, the remote
control is properly programmed to operate
the equipment. If the equipment does not
respond, repeat steps 2-4 with the next
three digit code listed in step 3 for your
equipment.
[]
Figure 2. Programming the remote to control your
satelfite receiver.
[]
?o rew_w _ _ _nu=r_
Figure 1. Programming the remote to controlyour cable
box.
[]
Figure 3. Programming the remote to control your VCR.