Mitsubishi WS-A48 Owner's Manual page 48

AUDIO/VIDEO SETTINGS Menu: Audio Output
Figure 1. AUDIO/VIDEO SETTINGS menu
(A/V Memory Reset)
I PUT
!DE :
Figure 2. The AUDIO, VIDEO, and ADJUST buttons.
AUDIO/VIDEO SETTINGS Menu
(Figure 1)
Each of the seven or eight inputs has its own
A/V memory. You can adjust each input's A/V
memory in two ways. You can use the menu or
the remote control.
A/V Memory Reset
A/V Memory Reset will return the currently
selected input's A/V memory to the factory
settings. To reset an input's A/V memory, select
A/V Memory Reset, select the input you want to
reset, and press ENTER.
TV Speakers
This selection will turn on or off the TV's internal
speakers. You may select Off when sending
the sound through a separate stereo system or
surround sound A/V receiver.
Audio Output
Select Fixed if your audio receiver or stereo
system can be controlled with a remote. This
allows you to adjust the volume with the
system's remote control or the TV remote
control, if compatible. This setting is better for
surround sound receivers. Select Variable if
your audio receiver or stereo system cannot be
controlled with a remote. This allows the TV's
internal circuitry to adjust the volume.
AUDIO SETTINGS and VIDEO SETTINGS
After selecting AUDIO SETTINGS or VIDEO
SETTINGS, you can adjust the settings by
pressing A, v, q, or b. For descriptions of
the individual A/V settings see A/V Setting
Descriptions, pages 49-50.
Using the AUDIO and VIDEO Buttons
on the Remote Control
(Figure 2)
[] Press AUDIO or VIDEO to cycle through the
available settings.
[] Press ql or b to adjust the setting. After 5
seconds of inactivity, the setting display will
disappear.