12.4.3
Output Waveforms during LCD Controller/Driver
Operation (1/4 Duty Ratio)
In the 1/4 duty ratio mode, all four common outputs, COM0, COM1, COM2, and COM3
are used.
I 1/3 bias, 1/4 duty output waveforms
The maximum potential difference exists between a segment output and the corresponding common output
when the segment (LCD cell) is turned on. Figure 12.4-6 "Output waveforms, 1/3 bias and 1/4 duty ratio
example" shows the output waveforms for the display RAM contents listed in Table 12.4-3 "Display RAM
contents example".
Table 12.4-3 Display RAM contents example
Segment
SEGn
SEGn+1
Display RAM contents
COM3
COM2
0
1
0
1
CHAPTER 12 LCD CONTROLLER/DRIVER
COM1
0
0
COM0
0
1
257