Troubleshooting Tips - GE JGB900 Owner's Manual & Installation Instructions

Before you call for service...
Troubleshooting -tips
Save time and money/. Review the charts on the following
pages first and you may not need to call for service.
Possible Causes What To Do
To bumem do notlig_ Plug on range is not completely * Make sure electrical plug is plugged into a live properly
or do not burn evenly, inserted in the electrical outlet, grounded _uflet.
(The front right burner is _ _ -- -- -- _ --
....... Burner slits on the side of the Reillove the burner heads and clean them. Check the
ueslgned to nave Sllgmly ,_
burner may be clomyed electrode
_ll'e;I _of bul'ned-on toed of _l'e;ise _ee
the
smaller flames between _ _ " . . ' ' "'_
., ^ -, .... Care and cleaning of the range sateen.
_ue t_ aria u o CLOCK __ _,
positions, This is normaL) hnproper burner assembly. * Make sure the burner parts are installed correctly.
See the Care and cleaning of the range section. "
Burner flames very hnproper air to gas ratio. * If range is compacted to [,P gas, contact the person
large or Fellow who installed your range or made the conversion.
Surface burners light The oven gas shut-off valve * To check the oven gas shut-off valve, remove the
but oven does not may have accidentally been wanning drawer (s_e the Care and cleaning of the range
moved during clemfing or section) and look for the gas shut-e11 lever at the back
movh_g, of the range, .
sqlown c losed._.
PULL T OOPEN.
Sealed burner models
5()