Configuring System Time
Defining SNTP Settings
STEP 1
Cisco Small Business SFE/SGE Managed Switches Administration Guide
Click System > System Management > Time > SNTP Settings. The
Page
opens:
SNTP Settings Page
SNTP Settings Page
The
•
Enable SNTP Broadcast — Enables polling the selected SNTP Server for
system time information.
•
SNTP Server — Indicates the SNTP server IP address. Up to eight SNTP
servers can be defined.
•
Poll Interval — Defines the interval (in seconds) at which the SNTP server is
polled for system time information. By default, the poll interval is 1024 seconds.
•
Encryption Key ID — Indicates the Key Identification used to communicate
between the SNTP server and device. The range is 1 - 4294967295.
•
Preference — The SNTP server providing SNTP system time information. The
possible field values are:
-
Primary
— The primary server provides SNTP information.
-
Secondary
-
In progress
information.
contains the following fields:
— The backup server provides SNTP information.
— The SNTP server is currently sending or receiving SNTP
3
SNTP Settings
37