Mapping Dns Hosts - Cisco SGE2000 - - Gigabit Switch Administration Manual

Configuring IP Information
Domain Name System
STEP 3
STEP 4
Cisco Small Business SFE/SGE Managed Switches Administration Guide
•
IPv6 Address Type — Indicates the IPv6 Type. The possible field values are:
-
Link-Local
— Indicates the IPv6 address is link-local.
-
Global Unicast
•
Link Local Interface —Indicates the IPv6 link-local interface. The possible field
values are:
-
VLAN
— Indicates that theIPv6 link-local interface is defined as a VLAN
used.
-
ISATAP
— Indicates that the IPv6 link-local interface is defined as a
virtual IPv6 local link via ISATAP.
•
DNS Server IP Address— Enter the DNS server's IP address.
•
Set DNS Server Active — Defines active status of the new DNS Server. The
possible values are:
-
Checked
— This new server becomes the active DNS Server.
-
Unchecked
Define the relevant fields.
Click Apply. The DNS server is added, and the device is updated.

Mapping DNS Hosts

Host Mapping Page
The
To add a host map:
— Indicates the IPv6 address is global Unicast.
— This new server is not the active DNS Server.
provides information for defining DNS Host Mapping.
7
226