Defining Multicast Tv Vlan - Cisco SGE2000 - - Gigabit Switch Administration Manual

Configuring VLANs

Defining Multicast TV VLAN

Defining Multicast TV VLAN
Cisco Small Business SFE/SGE Managed Switches Administration Guide
An access port can be configured as a member of a Multicast TV VLAN. See
Defining VLAN Interface Setting
to Level 2-isolated subscribers, without replicating the multicast transmissions for
each subscriber VLAN. IGMP snooping is supported for those transmissions.
Any VLAN can be a Multicast-TV VLAN. A port assigned to a Multicast-TV VLAN:
•
Joins the Multicast-TV VLAN.
•
Packets passing through egress ports in the Multicast TV VLAN are untagged.
•
The port's Frame Type parameter is set to Admit All, allowing untagged
packets (see "Defining VLAN Interface Settings").
The Multicast TV VLAN configuration is defined per port. Customer ports are
configured to be member of Multicast TV VLAN using the
Page.
To define the Multicast TV VLAN configuration:
. This is required to supply multicast transmissions
6
Multicast TV VLAN
181