Defining Snmp Groups - Cisco SGE2000 - - Gigabit Switch Administration Manual

48-port 10/100/1000 sfe/sge managed switches
Hide thumbs Also See for SGE2000 - Cisco - Gigabit Switch:
Table of Contents

Advertisement

Configuring SNMP
Configuring SNMP Security
STEP 3
STEP 4
Cisco Small Business SFE/SGE Managed Switches Administration Guide
Authentication Method— Indicates the Authentication method used. The
possible field values are:
-
MD5 Key
— Users are authenticated using a valid HMAC-MD5 key.
-
SHA Key
— Users are authenticated using a valid HMAC-SHA-96 key.
-
MD5 Password
using the HMAC-MD5-96 authentication method.
-
SHA Password
using the HMAC-SHA-96 authentication method.
-
None
— No user authentication is used.
Password — Defines the local user password. Local user passwords can
contain up to 159 characters. This field is available if the Authentication Method
is a password.
Authentication Key — Defines the HMAC-MD5-96 or HMAC-SHA-96
authentication level. The authentication and privacy keys are entered to define
the authentication key. If only authentication is required, 16 bytes are defined. If
both privacy and authentication are required, 32 bytes are defined. Each byte
in hexadecimal character strings is two hexadecimal digits. Each byte can be
separated by a period or a colon. This field is available if the Authentication
Method is a key.
Privacy Key — Defines the Privacy Key (LSB). If only authentication is required,
20 bytes are defined. If both privacy and authentication are required, 36 bytes
are defined. Each byte in hexadecimal character strings is two hexadecimal
digits. Each byte can be separated by a period or colon. This field is available if
the Authentication Method is a key.
Define the relevant fields.
Click Apply. The SNMP User is modified, and the device is updated.

Defining SNMP Groups

SNMP Groups Page
The
assigning SNMP access control privileges to SNMP groups. Groups allow network
managers to assign access rights to specific device features, or features aspects.
— Users should enter a password that is encrypted
— Users should enter a password that is encrypted
provides information for creating SNMP groups and
12
310

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sge2000pSge2010Sfe2010Sfe2000

Table of Contents