–
SNMP — Assigns SNMP access to the rule. If selected, users accessing the device using
SNMP meeting access profile criteria are permitted or denied access to the device.
•
Interface — Defines the interface on which the access profile is defined. The possible field values
are:
–
Port — Specifies the port on which the access profile is defined.
–
LAG — Specifies the LAG on which the access profile is defined.
–
VLAN — Specifies the VLAN on which the access profile is defined.
•
Source IP Address — Defines the interface source IP address to which the access profile applies.
The Source IP Address field is valid for a subnetwork.
•
Network Mask — Determines what subnet the source IP Address belongs to in the network.
•
Prefix Length — Defines the number of bits that comprise the source IP address prefix, or the
network mask of the source IP address.
•
Action — Defines the action attached to the rule. The possible field values are:
–
Permit — Permits access to the device.
–
Deny — Denies access to the device. This is the default.
3. Define the relevant fields.
4. Click Apply. The profile rules are defined, and the device is updated.
Chapter 4:
SFE2000/SFE2000P Gigabit Ethernet Switch Reference Guide
Chapter
4
59