Chapter
9
SFE2000/SFE2000P Gigabit Ethernet Switch Reference Guide
–
Excluded — The port is not part of a Multicast group.
–
Dynamic — Attaches the port to the Multicast group as dynamic member.
Multicast Forwarding
Modifying
1. Click Bridging > Multicast > Forward. The Multicast Forward Page opens:
2. Click the Edit button. The Edit Multicast Forward All Page opens:
The Edit Multicast Forward All Page contains the following fields:
•
VLAN ID — Displays the VLAN ID.
•
Interface — Displays the port or LAG attached to the Multicast Group.
•
Interface Status — Displays the interface status.
3. Define the relevant fields.
4. Click Apply. The multicast forward all settings are defined, and the device is updated.
156
Edit Multicast Forward All Page
Chapter 9: