Page 11
Install: Stack Before setting up stacked switches in your network, see the technical bulletin, “Linksys Stackable Switches: How to Build Stacks and Understand Their Operation,” available at www.linksys.com.
Page 12
Install: Stack Use only ports G1/G2 for stacking. If you manually assign a Warning Unit ID to one unit, you should manually assign Unit IDs to all units. Using both system-assigned and manually-assigned IDs in your network can impact system performance.
Regulatory Compliance and Safety Information he Linksys One SFE2000 Fast Ethernet switch meets the following regulatory compliance and safety standards Specification Regulatory Compliance Products with the CE Marking indicate compliance with the 89/336/EEC and 73/23/EEC directives, which include the safety and EMC standards listed below.
Page 16
Federal Communication Commission Interference Statement This Equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
Environmental Specifications Dimensions 17.32" x 1.73" x 14.70" (440 mm x 44 mm x 375 mm) Unit Weight 9.68 lbs. or 154.85 oz (4.39 kg) Power 48 VDC, 100-240V 1.5A Certification UL (UL 60950), CSA (CSA 22.2), CE mark, FCC Part 15 (CFR 47), Class A EN60950 (2001) Security ACL, 802.1x...
Safety Information The following statements are warnings or safety guidelines. A warning means danger. You are in a situation that could cause bodily injury. Before working on equipment, be aware of the hazards involved with electrical circuitry and standard safety practices to prevent accidents.
Page 19
Installation Instructions Warning Read the installation instructions before connecting the system to the power source. SELV Circuit Warning To avoid electric shock, do not connect safety extra-low voltage (SELV) circuits to telephone-network voltage (TNV) circuits. LAN ports contain SELV circuits, and WAN ports contain TNV circuits.
Page 20
Comply with Local National Electrical Codes Warning Installation of the equipment must comply with local and national electrical codes. Product Disposal Warning Ultimate disposal of this product should be handled according to all national laws and regulations.
Page 21
Power Safety Warnings When using the SFE2000 Fast Ethernet Switch, observe the following power safety warnings: Warning TN Power The device is designed to work with TN power systems. Warning Ground Conductor Warning Never defeat the ground conductor or operate the equipment in the absence of a suitably installed ground conductor.
Page 22
Power Supply Installation Warning Warning The power supply must be placed indoors. Circuit Breaker Warning This product relies on the building’s installation for short-circuit (overcurrent) protection. Ensure that the protective device is rated not greater than: 120 VAC, 15A U.S. (240 VAC, 10A international) Main Disconnecting Device Warning...
Page 23
Agreement and do not retain any full or partial copies of the Software, and the recipient agrees to the terms of this Agreement. “Software” includes, and this Agreement will apply to (a) the Linksys software provided in or with the applicable Linksys product, and (b) any upgrades, updates, bug fixes or modified versions (“Upgrades”) or backup copies of the Software supplied to You by Linksys or an authorized...
Page 24
Open Source Software. The GPL source code incorporated into the Software is available for free download at http://www.linksys.com/gpl. If You would like a copy of the GPL source code in this Software on a CD, Linksys will mail to You a CD with such code for $9.99 plus the cost of shipping upon request.
This limited warranty is non-transferable and extends only to the original end-user purchaser. Your exclusive remedy and Linksys' entire liability under this limited warranty will be for Linksys, at its option, to (a) repair the product with new or refurbished parts, (b) replace the product with a reasonably available equivalent new or refurbished Linksys product, or (c) refund the purchase price of the product less any rebates.
This limited warranty gives you specific legal rights, and you may also have other rights which vary by jurisdiction. TO THE EXTENT NOT PROHIBITED BY LAW, IN NO EVENT WILL LINKSYS BE LIABLE FOR ANY LOST DATA, REVENUE OR PROFIT, OR FOR SPECIAL, INDIRECT, CONSEQUENTIAL, INCIDENTAL OR PUNITIVE DAMAGES, REGARDLESS OF THE THEORY OF LIABILITY (INCLUDING NEGLIGENCE), ARISING OUT OF OR RELATED TO THE USE OF OR INABILITY TO USE THE PRODUCT (INCLUDING ANY SOFTWARE), EVEN IF LINKSYS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
Customers outside of the United States of America and Canada are responsible for all shipping and handling charges, custom duties, VAT and other associated taxes and charges. Repairs or replacements not covered under this limited warranty will be subject to charge at Linksys' then-current rates.