Price Change Function - Sharp UP-X300CF256 Instruction Manual

Price change function

You can use this function when you need to change the unit price or associated department of a PLU/
EAN item.
There are two methods for change:
1. Price change mode
You can change the preset price and/or the associated department of a PLU/EAN item permanently.
2. Changing price during a transaction
When you find a wrong price and/or associated department upon transaction, you can correct them at
the time of transaction. With the entry of new price and/or associated department, the preset price and/
or associated department is automatically changed to the new price and/or associated department. The
changed price/associated department is valid until the operation for the End of the Day.
NOTE
• In case price change functiuon is prohibited for the item by programming, the warning message
"Change Inhibited Product" will appear. Touch the [CL] key to cancel.
Price change mode
1.
Touch the [PRICE CHANGE] key.
2.
Enter an objective item.
• Code entry:
• Direct PLU entry: ➞ [Direct PLU key]
• Scanning an EAN code
3.
The key pad will appear, and the unit price and the associated department code will be displayed
at the Price and Department# columns respectively.
4.
Execute one of the following options.
• Touch [Cancel] to cancel the price change mode.
• Enter a new price and/or associated department code, and touch [OK]. The new price and/or
associated department code are registered.
56
➞ PLU/EAN code ➞ [PLU/SUB]